S_DebandRemoves banding artifacts from a clip by diffusing pixels across the banded areas, while keeping the original edges intact. To use this effect, first select Show:Edges and adjust the edge threshold until the banding edges just disappear, leaving only the desired real edges. Then select Show:Result to see the result. If you still see some banding, increase Diffuse Threshold and/or Diffuse Radius.In the Sapphire Blur+Sharpen category. Inputs:
|
|
Parameters:
- Load Preset: Push-button.
Brings up the Preset Browser to browse all available presets for this effect.
- Save Preset: Push-button.
Brings up the Preset Save dialog to save a preset for this effect.
- Mocha: Default: 0, Range: 0 or greater.
Brings up the Mocha window for tracking footage and generating masks.
- Blur Mocha: Default: 0, Range: 0 or greater.
Blurs the Mocha Mask by this amount before using. This can be used to soften the edges or quantization artifacts of the mask, and smooth out the time displacements.
- Mocha Opacity: Default: 1, Range: 0 to 1.
Controls the strength of the Mocha mask. Lower values reduce the intensity of the effect.
- Invert Mocha: Check-box, Default: off.
If enabled, the black and white of the Mocha Mask are inverted before applying the effect.
- Resize Mocha: Default: 1, Range: 0 to 2.
Scales the Mocha Mask. 1.0 is the original size.
- Resize Rel X: Default: 1, Range: 0 to 2.
The relative horizontal size of the Mocha Mask.
- Resize Rel Y: Default: 1, Range: 0 to 2.
The relative vertical size of the Mocha Mask.
- Shift Mocha: X & Y, Default: screen center.
Offsets the position of the Mocha Mask.
- Dilate Mocha: Default: 0, Range: -100 to 100.
Dilates or erodes the Mocha Mask by this pixel amount before using.
- Dilation Quality:
Popup menu, Default: Fast.
Selects whether Dilate Mocha adusts quickly in default Fast mode or looks better in High quality mode.- Fast: Dilate Mocha in Fast mode for quick adjustments.
- High: Dilate Mocha in High quality mode for a better looking mask shape.
- High: Dilate Mocha in High quality mode for a better looking mask shape.
- Fast: Dilate Mocha in Fast mode for quick adjustments.
- Bypass Mocha: Check-box, Default: off.
Ignore the Mocha Mask and apply the effect to the entire source clip.
- Show Mocha Only: Check-box, Default: off.
Bypass the effect and show the Mocha Mask itself.
- Combine Masks:
Popup menu, Default: Union.
Determines how to combine the Mocha Mask and Input Mask when both are supplied to the effect.- Union: Uses the area covered by both masks together.
- Intersect: Uses the area that overlaps between the two masks.
- Mocha Only: Ignore the Input Mask and only use the Mocha Mask.
- Intersect: Uses the area that overlaps between the two masks.
- Union: Uses the area covered by both masks together.
- Edge Threshold: Default: 2, Range: 0 to 255.
The amount by which adjacent pixels must differ to constitute a real desired edge. A value of 1.0 represents the smallest possible difference at 8 bits. This parameter should be set high enough that none of the bands appear as edges, but low enough that all the real edges are still detected.
- Grow Edges: Default: 0, Range: 0 or greater.
Amount to grow the detected edges in approximate pixels. Increasing this parameter can prevent diffusion in areas that are near edges, but not on an edge.
- Diffuse Threshold: Default: 1, Range: 0 or greater.
The maximum color difference allowed when diffusing pixels. This parameter is automatically scaled by the edge threshold. Increasing it can give better results when there is a gradient within the bands. Decreasing it will reduce diffusion in areas where there are no edges.
- Diffuse Radius: Default: 12, Range: 0 or greater.
The maximum radius of pixel diffusion, in approximate pixels. A larger value will remove banding more effectively in large areas with uniform colors, while a smaller value will give a better result in areas with many small color regions.
- Pre Blur: Default: 0, Range: 0 or greater.
Blurs the source before diffusing pixels.
- Post Blur: Default: 0.5, Range: 0 or greater.
Blurs the result after diffusing pixels. Use this parameter to reduce noisiness in the result.
- Show:
Popup menu, Default: Result.
Selects the type of output.- Result: Shows the final result.
- Edges: Shows the edges of the image, where adjacent pixels differ by more than Edge Threshold. Use this mode to help fine-tune the edge detection parameters.
- Edges: Shows the edges of the image, where adjacent pixels differ by more than Edge Threshold. Use this mode to help fine-tune the edge detection parameters.
- Result: Shows the final result.
- Mask Use:
Popup menu, Default: Luma.
Determines how the Mask input channels are used to make a monochrome mask.- Luma: the luminance of the RGB channels is used.
- Alpha: only the Alpha channel is used, or if there is no valid Alpha channel the Red channel is used.
- Alpha: only the Alpha channel is used, or if there is no valid Alpha channel the Red channel is used.
- Luma: the luminance of the RGB channels is used.
- Blur Mask: Default: 0.05, Range: 0 or greater.
Blurs the Mask input by this amount before using. This can provide a smoother transition between the masked and unmasked areas. It has no effect unless the Mask input is provided.
- Invert Mask: Check-box, Default: off.
If on, inverts the mask input so the effect is applied to areas where the Mask is black instead of white. This has no effect unless the Mask input is provided.
