3D Projection
The 3D Projection node projects an input image onto a card or geometric primitive through a camera in a 3D scene. Use it to project painted repairs, replacement images, or graphics onto an existing surface.
The projection can follow the camera and input image sequence, or both can be frozen at a selected frame. Freezing the projection is useful when painting a repair on one frame and viewing it through a moving camera.
Projecting An Image Onto A Surface
1 Prepare a 3D scene with the SynthEyes node containing a camera and a card or geometric primitive positioned where the image should appear.
2 Add a 3D Projection node from the 3D group.
3 Connect the SynthEyes Data output to the 3D Projection node’s Data input.
4 Connect the image to be projected to its input.
5 Select the 3D Projection node to view and edit it.
6 Choose the card or primitive in Surface.
7 Choose the projection camera in Camera. Use Active Camera to project through the scene’s active camera, or select a named camera.
8 Leave Freeze Frame enabled and set Projection Frame to the frame on which the image aligns with the surface. Disable Freeze Frame to use the image and camera at each current frame.
9 Adjust Edges and Opacity as needed.
10 Connect the 3D Projection Data output to a 3D Renderer node. View the renderer’s image output and play through the sequence to check the result.
Projecting A Painted Repair
1 Choose a reference frame where the area to be repaired is clearly visible.
2 Paint the repair on that frame and connect the painted image to the 3D Projection node’s Input.
3 Select a surface that matches the position and shape of the area being repaired.
4 Select the camera that matches the source footage.
5 Enable Freeze Frame and set Projection Frame to the reference frame.
6 Render through the scene’s animated camera and check the repair throughout the shot.
7 Use an input image with transparency to limit the projection to the painted area.
Note: A frozen projection can reveal stretched or uncovered areas as the viewing angle changes. Check that the source image and target surface cover the required area throughout the shot.